Gas safety certificates (CP12): what the law requires of a landlord
A landlord in England needs a gas safety certificate (CP12) every 12 months: a Gas Safe registered engineer checks each appliance and flue the duty covers. After the check, the landlord is given a Landlord Gas Safety Record, often called a CP12 in the industry, though that is not its legal name.
Source — checked
Source — checked
This page covers the law in England. Each claim in the sections below links to its own source and the date it was checked.
If you smell gas, or a carbon monoxide alarm sounds: don't smoke, light a flame or touch light switches, open the doors and windows, turn the gas off at the meter if you can reach it safely and it isn't in a cellar or basement, get everyone out, and call the National Gas Emergency Service free on 0800 111 999 before anything else — before calling us.
The Hero Agreement requires current Gas Safe registration for any gas work through London Heroes.
How long a gas safety certificate lasts
A landlord must ensure that every relevant gas fitting, and any flue that serves one, is maintained in a safe condition. Each gas appliance and flue covered by that duty must be checked for safety within 12 months of being installed and then at intervals of not more than 12 months since it was last checked. When a lease starts, each appliance and flue must have been checked within the 12 months before the lease begins, or within 12 months of being installed, whichever is later. Any check or work on them must be carried out by, or by an employee of, a member of the class of persons approved by the Health and Safety Executive under regulation 3(3) (the Gas Safe Register).
Source — checked
Since 6 April 2018, a check completed within the 2 months ending with the deadline date (the last day of the 12-month period in which the check was due) is treated as if it had been made on the deadline date, so an early check inside that window does not bring the next deadline forward.
Source — checked
A landlord may instead have an appliance or flue checked within the 2 months beginning with the deadline date, but only once for each appliance or flue in the premises, and only to line its next check up with the next check of another appliance or flue in the same premises.
Source — checked
Gas Safe Register says a landlord gas safety check can be carried out any time from 10 to 12 months after the last completed check without affecting the original expiry date, and that a check less than 10 months or more than 12 months after the last one gives a new deadline 12 months from the most recent check.
Source — checked
Copies for your tenants
A copy of the record must be given to each existing tenant within 28 days of the check, and a copy of the last record for each appliance or flue must be given to any new tenant before that tenant occupies the premises, save that, for a new tenant whose right to occupy the premises is for a period not exceeding 28 days, a copy of the record may instead be prominently displayed within the premises.
Source — checked
Where there is no relevant gas appliance in any room the tenant occupies or will occupy, the landlord may instead display a copy of the record in a prominent position, endorsed with a statement that the tenant is entitled to their own copy on request at an address it gives, and must then give a copy as soon as practicable when asked.
Source — checked
How long to keep each record
The landlord must ensure a record of each check is made and kept until there have been two further checks of that appliance or flue, or, for an appliance or flue removed from the premises, for 2 years from the date of its last check. The record must include the date of the check, the address of the premises, the name and address of the landlord (or agent), a description and the location of each appliance or flue checked, any safety defect identified, any remedial action taken, confirmation that the check met regulation 36(9), the name and signature of the person who did the check, and the registration number under which that person or their employer is registered.
Source — checked
Appliances your tenant owns
Regulation 36's duties cover every 'relevant gas fitting' and any flue that serves one. A relevant gas fitting is any gas appliance or installation pipework installed in the let premises, other than an appliance the tenant is entitled to remove from the premises, together with any gas appliance or installation pipework that serves the premises and is either installed in other premises in which the landlord has an interest or is owned or controlled by the landlord.
Source — checked
HSE says that where a tenant has their own gas appliance that the landlord has not provided, the landlord is responsible for parts of the associated installation and pipework but not for the appliance, and that tenants are responsible for the gas safety checks of their own appliances, and of the flue if it only serves their appliance. HSE recommends including all flues (such as chimneys) connected to gas appliances in the landlord's gas safety check, even where they do not serve appliances the landlord provides.
Source — checked
Gas Safe Register says appliances owned by tenants are not the landlord's direct responsibility, although it is still up to the landlord to ensure the safety of any connecting flues.
Source — checked
What the check covers
A landlord's gas safety check must include, but is not limited to, an examination of the effectiveness of any flue, the supply of combustion air, the appliance's operating pressure or heat input (or both where necessary, or its combustion performance where examining those is not reasonably practicable), and its operation so as to ensure its safe functioning.
Source — checked
Gas Safe Register says a gas safety check assesses the basic safety of gas appliances, and includes, but is not limited to, checking that appliances are burning correctly with the correct operating pressure, that harmful gases are being removed safely to the air outside, that ventilation routes are clear and adequate, and that any safety devices are working properly. A service goes further: it follows the manufacturer's instructions, for example cleaning components and replacing serviceable parts.
Source — checked
Gas Safe Register says installation pipework is not covered in an annual landlord gas safety check, but a landlord has a duty for ongoing maintenance for any pipework and fittings under their control, and strongly advises asking the Gas Safe registered engineer to test for tightness on the whole gas system, including installation pipework, and to visually examine the pipework so far as is reasonably practicable.
Source — checked
A lost or duplicate certificate
Gas Safe Register, asked whether it can provide an annual safety check certificate or the Landlord's Gas Safety Record for a property, says it does not hold copies of these certificates and there is no central database where they are stored. To obtain a copy, it says, you will need to contact the business that completed the check, or where applicable ask your landlord.
Source — checked
For the landlord gas safety record itself, Gas Safe Register says the landlord must keep an auditable copy, kept until two further gas safety checks have been completed (or, for an appliance or flue removed from the property, for two years from the last check), and that Gas Safe Register does not produce its own gas safety check record form.
Source — checked
Gas Safe Register issues duplicate Building Regulations Compliance Certificates, online or by phone on 0800 408 5500, for a charge. That certificate is a different document from the landlord gas safety record: you should receive one when a Gas Safe registered engineer installs a heat-producing gas appliance in your property. Gas Safe Register says the documentation an engineer leaves after fitting, servicing or safety checking an appliance depends on the purpose and type of work, and that the only such documentation required by law is a Landlord Gas Safety Record.
Source — checked
HSE says any gas safety check record given after 1 April 2009 is only valid if the engineer is registered with Gas Safe Register. Asked whether there is a standard form, HSE names the 'Landlord gas safety record' (previously referred to as a gas safety record, certificate or CP12 form) and says Gas Safe Register does not produce its own record form, though many retailers do. HSE says a landlord may produce their own record, provided it is given to the Gas Safe registered engineer to fill in before the check.
Source — checked
Smoke and carbon monoxide alarms
In England, the immediate landlord under a specified tenancy must ensure that, during any period when the premises are occupied under the tenancy, a smoke alarm is equipped on each storey of the premises on which there is a room used wholly or partly as living accommodation. A bathroom or lavatory counts as a room used as living accommodation.
Source — checked
The landlord must also ensure that a carbon monoxide alarm is equipped in any room used wholly or partly as living accommodation that contains a fixed combustion appliance other than a gas cooker. For this purpose a 'room' includes a hall or landing, and a bathroom or lavatory counts as a room used as living accommodation.
Source — checked
The landlord must ensure each required alarm is checked and in proper working order on the day a new tenancy begins (the day the tenant is entitled to possession). A 'new tenancy' is one granted on or after 1 October 2022, but not one granted under an agreement entered into before that date, or one that simply follows an earlier tenancy between the same landlord and tenant for the same or substantially the same premises. Where a tenant, or their nominated representative, reports that an alarm is not in proper working order, the landlord must have it checked and repaired or replaced as soon as reasonably practicable.
Source — checked
If a tenant refuses access
Gas Safe Register's guidance for a landlord whose tenant refuses access is on our gas services page.
If my tenant refuses access, do I still have to do the gas safety check?
If you own and live in the home
There is no statutory requirement for an owner-occupier to have their own gas appliances serviced or safety-checked on any fixed schedule (unlike landlords). What the law controls is who may do gas work. Regulation 3 of GSIUR states: 'No person shall carry out any work in relation to a gas fitting or gas storage vessel unless he is competent to do so', and 'no employer shall allow any of his employees to carry out any work in relation to a gas fitting or service pipework and no self-employed person shall carry out any such work, unless the employer or self-employed person, as the case may be, is a member of a class of persons approved for the time being by the Health and Safety Executive' — the Gas Safe Register. So anyone doing gas work in a home must be competent, and a business or self-employed engineer doing it must be Gas Safe registered (regulation 3(4) exempts from the registration rule only replacing a hose or regulator on a portable or mobile space heater, or a hose connecting a refillable cylinder to installation pipework).
Source — checked
Penalties
HSE guidance to landlords states plainly of non-compliance: 'You are putting lives at risk and breaking the law. HSE gives gas safety a high priority and will take the appropriate action to ensure compliance with the regulations; this could result in a substantial fine and/or a custodial sentence.'
Source — checked
Breach of the Health and Safety at Work etc Act 1974 (which underpins enforcement of GSIUR) can lead to prosecution under section 33. For an offence under section 33(1)(a) relating to sections 2-6 duties, and for an offence under section 33(1)(c) (contravening health and safety regulations), Schedule 3A sets the maximum penalty in England and Wales on summary conviction (magistrates' court) as imprisonment for a term not exceeding the general limit in a magistrates' court, or a fine (unlimited), or both; on conviction on indictment (Crown Court) as imprisonment for a term not exceeding two years, or a fine (unlimited), or both. This is the general HSWA penalty structure that gas safety enforcement sits within.
Source — checked
Checking the engineer
Every Gas Safe registered engineer carries a Gas Safe ID card. Its front shows the engineer's photo, the card's start and expiry dates (the cards are renewed annually), a unique seven-digit licence number you can use to check the engineer on the Gas Safe Register online, the official Gas Safe Register hologram and the business name. Its back lists the specific appliances (for example boilers, cookers, fires or meters) and the gas type (for example natural gas or LPG) the engineer is qualified for. Many engineers now carry a Gas Safe Digital ID Card on their smartphone or tablet, just as valid as a physical card: it displays the engineer's photo, licence number and expiry date, and offers real-time verification: scan the QR code from your mobile device to verify their details on the official Gas Safe Register website.
Source — checked
To check an engineer, use the current seven-digit licence number on the front of their Gas Safe ID card with Gas Safe Register's online 'check an engineer' service, or call Gas Safe Register on 0800 408 5500. An engineer should be able to show you the card or tell you the number over the phone. A business can be checked by its trading name or Gas Safe registration number.
Source — checked
Common questions
How often should I get a gas safety certificate?
Is a gas safety check just the boiler?
Is a gas safety certificate mandatory for landlords?
Do tenants get a copy of a gas safety certificate?
Can a plumber do a gas safety check?
Checked against the sources cited above between and ; each claim shows the date it was checked. Rules and guidance change — always confirm anything material against the official source before acting on it.
Need the check done?
Describe it in two minutes — you approve the price before any work starts.